My Building Water System Tested Positive for Legionella: Now What?

My Building Water System Tested Positive for Legionella: Now What?

We detected the presence of Legionella in one or more of our building water systems….. Now what do we do? This is probably the second most commonly asked question, surpassed only by:  “Do I have to test my water systems for Legionella?”  Often the question is posed this way:

“We recently performed Legionella testing on our building water systems and found one or more positive sample results.  What should we do about it?”

Ice Machines and Legionella

A Growing Problem

Ice Machines and Legionella

Each day people all over the world are exposed to ice. Whether it be from their refrigerator ice machine, their favorite restaurant, during their hospital stay, or on an airplane, people sip on their ice cold beverages or suck on ice chips unaware of the microorganisms that could be sitting dormant within the ice.

Legionella: To Sample, or Not To Sample?...That is the Question

What's required and what is my sampling plan?

Legionella: To Sample, or Not To Sample?...That is the Question

The simple answer is no (not directly), and here’s why:  There is no known safe level of Legionella in a building water system.  Therefore, even a non-detect sample result is not necessarily “safe.” The reason why is because the life cycle of this organism, coupled with the stresses put on it via temperature, disinfectants, etc. found within building water systems, may cause it to enter a viable but non-culturable (VBNC) state. 

Chlorine and Bromine Testing In Cooling Tower Systems

What You Need to Know

  • 25 June 2019
  • Author: Allan Browning
  • Number of views: 2355
  • 0 Comments
Chlorine and Bromine Testing In Cooling Tower Systems

Chlorine and bromine based biocides are widely used for microbiological control in cooling tower systems. These halogen compounds form strong oxidizing agents in water, which is how they kill bacteria and other microorganisms. Routine testing is important to confirm effective halogen residuals are maintained. Low residuals can result in poor microbiological control. High residuals can cause corrosion and destroy inhibitors.

How to Calculate Softener Capacity

  • 18 June 2019
  • Author: Chem-Aqua, Inc
  • Number of views: 1013
  • 0 Comments
How to Calculate Softener Capacity

Water softeners are ion exchange systems designed to remove scale-forming calcium and magnesium ions prior to boiler, cooling, and reverse osmosis systems. The amount of hardness a softener can remove between regenerations is known as the softener capacity and can be expressed either in grains or in gallons. Capacity is important when sizing, configuring, or troubleshooting a softener.

RSS
12345678910Last