Chem-Aqua manufactures multiple sizes of both vertical and horizontal reverse osmosis membrane configurations that can be used in commercial or industrial applications. Each reverse osmosis system is manufactured with a powder coated steel skid frame to prevent rust. All units are pre-programmed to site specifications. If a standard unit is not what you are looking for, we can custom design units to fit your facility's needs.

CRO-2.5V Series Reverse Osmosis Systems
Chem-Aqua CRO-2.5V Series systems are designed with a compact, vertical membrane housing configuration for applications requiring purified water. Units in this series include: a high flow, low energy membranes in PVC housing, a integral 5 micron sediment pre-filter, an integral carbon filter, and panel mounted instrumentation. Standard units are available with output capabilities from 1 - 2 gpm (1,440 - 2,880 gpd).

CRO-4V Series Reverse Osmosis Systems
Chem-Aqua CRO-4V Series systems are designed with a compact, vertical membrane housing configuration for applications requiring high purity water. Units in this series include: high rejection membranes in fiberglass reinforced plastic (FRP) pressure vessels, a integral 5 micron sediment pre-filter, a microprocessor controller with NEMA-4X enclosures, actuated automatic inlet feed valves, RO reject and recycle flow control valves, and panel mounted instrumentation. Standard units are available with output capabilities from 3 - 4 gpm (4,320 - 5,760 gpd).

CRO-4H Series Reverse Osmosis Systems
Chem-Aqua CRO-4H Series systems are designed with a compact horizontal membrane housing configuration for applications requiring high purity water. Units in this series include: high rejection membranes in FRP pressure vessels, integral 5 micron sediment pre-filter, a microprocessor controller with NEMA-4X enclosures, in-line instrumentation, actuated automatic inlet feed valve, and RO reject and recycle flow control valves. Standard units are available with output capabilities from 4.0- 20 gpm (5,760 - 28,800 gpd). Optional membrane Clean-in-Place (CIP) isolation valve, quick-connect cleaning ports, and chemical tank may be purchased for 10 gpm units and larger in this series. 

CRO-8H Series Reverse Osmosis Systems
Chem-Aqua CRO-8H Series systems are designed with a horizontal membrane housing configuration for industrial applications requiring high purity water. Units in this series include: high rejection RO membranes in FRP pressure vessels, a PLC controller with NEMA-4X enclosures, actuated automatic RO system inlet feed valves, and RO reject and recycle flow control valves. Standard units are available with output capabilities from 25 - 100 gpm (36,000 - 144,000 gpd). Optional membrane CIP isolation valve, quick-connect cleaning ports, and chemical tank as well as pH and ORP monitoring instrumentation may be purchased for units in this series.

Standard Features

  • Vertical and horizontal membrane configurations
  • Compact space-saving designs
  • Powder coated steel skid frame to prevent rust
  • 5 micron pre-filter
  • Standard units available with output capabilities from 1 – 100 gpm
  • In-line and panel mounted instrumentation depending upon the model
  • Pressure gauges, flow meter, and low pressure cut-off switches
  • Automatic system flush on shutdown
  • Stainless steel pumps
  • Pre-programmed for site specific conditions
  • Integrated clean-in-place system on units greater than 10 gpm
 

Chem-Aqua Advantage

  • Sized to achieve less than 17 gfd flow rate to increase membrane life
  • Manufactured in Chem-Aqua’s equipment facility
  • Standard or custom designs
  • Commercial and industrial applications
  • Professional service and installation
  • In-house technical support
  • Startup support

 

REVERSE OSMOSIS
 
 

Articles Brochures Technical Bulletins